1. High frequency quenching equipment for guide rails The use of high frequency heat treatment quenching machine

 RAC-160KW three-circuit induction heating equipment is an advanced direct heating equipment, which can be widely used in heat treatment of various metals, such as quenching, welding, melting, annealing, etc.

This equipment is mainly used for surface hardening of various complex shapes of steel and cast iron parts (small and medium modulus gears, machine tool guide rails, sprockets, camshafts, crankshafts, spline shafts, etc.).

Second, the composition of the equipment

1. Oscillator cabinet: built-in tube oscillator, voltage stabilizer, control circuit, monitoring instrument, tank coil, tank capacitor, etc. The quenching transformer is installed on the right side of the cabinet.

2. Power cabinet: built-in voltage regulating control device, Infineon IGBT, etc.

3. Transformer cabinet: built-in transformer.

3. Technical parameters

1. Oscillation frequency: 10-30KHZ

2. Oscillation power: >160KW

3. Output power: ≥160KW

4. Power supply: 3￠380V±10, 50HZ

Fourth, the use environment of the equipment

1. The ambient temperature is in the range of +5℃～+40℃.

2. Dust-proof and moisture-proof.

3. Equipped with ventilation equipment to remove the foul gas generated during quenching.

5. Water supply of equipment

1. Total water consumption: 5000 liters/hour.

2. The water pressure is between 0.1-1.5 atmospheres.

3. The hardness of water is not more than 0.017 g/L.

4. The resistance of water is not less than 4000 ohms/cubic centimeter.

5. The water inlet pipe of the equipment is Φ1" steel pipe and two 1" steel pipes.

6. The drain pipes are Φ1″ steel pipes and two 1″ steel pipes. In order to save water, a reservoir should be set up, and the water discharged from the equipment should be recycled for use, and the capacity of the water tank should not be less than 15 cubic meters.

RAC series super audio induction heating equipment type 160 main features:

1. Adopt IGBT solid state inverter technology, high efficiency and energy saving, high output power.

2. Load rate design, can work continuously for 24 hours. |

3. Digital phase-locking technology to achieve automatic frequency tracking.

4. Modular design, simple installation, convenient operation, no need to debug.

5. Perfect protection function, high reliability and easy maintenance.

6. The resonant frequency conversion technology is adopted to make the overall efficiency of the equipment ≥ 95%, and the efficiency is high.

7. It can replace other heating methods (such as gas, coking coal, oil furnace, electric furnace, high frequency electronic tube, etc.), energy saving and environmental protection.